Operation : Flash [ v1.16 ]
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : AA4F5C0C
ID_BLOCK_L : 35E0CB2AB538C99561CBA175918C2073
ID_BLOCK_L : 084DC73ACA383F880946BACB64A89DDF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!
Flash Chain : 4
Flashing now
ProgStart : crc start sector 122142719, over bytes 92
ProgFinish : Patched sector 122142719 with 51187196
Flash Error , Prepare data error #0 , Check battery charge!
Flash sequence completed!
Applying patches for storage # 0
Records : 26
Patch sequence completed!
BootConfig set to 0x00
Flashing done!
Done!
Elapsed: 00:00:02
Reconnect Power/Cable!