What's new
Gsmdevelopers

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Nokia 1212 After Change Power Chip Further Process?

gsmkasargod

Active member
Joined
Aug 31, 2016
Messages
1,495
Reaction score
1
Points
38
Nokia TA-1212 Model

The device was Dead Note detecting PC

Power chip Changed now device detecting PC can I get the support from Nokia experts to do further Process


Setting...
Setting done, result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FF4000 , 0x0000C000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
 

gsmkasargod

Active member
Joined
Aug 31, 2016
Messages
1,495
Reaction score
1
Points
38
Does anyone have firmware of this model if I get firmware I am going to flash the device and let's see what happens
 

gsmkasargod

Active member
Joined
Aug 31, 2016
Messages
1,495
Reaction score
1
Points
38
Ok Thanks in Advance

after flash and factory reset everything can see perfectly Done but the device not getting on

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 12 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 3E6E73677773EAF0F791729B6EEC35A5
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x00700000-0x007FFFFF , LEN : 0x00100000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!

 

gsmkasargod

Active member
Joined
Aug 31, 2016
Messages
1,495
Reaction score
1
Points
38
1st one file getting Bad file detected 2nd file everything done flashing but not getting On
 
Top