i have converted NB0 File to XML and flashed but device still not getting on Does anybody have ENG File while see this post Please respond Waiting
This is the log of umt flash
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM22)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00D00 [SDM710] 00000000
OPK_DATA : 1495EE3C2FEC7909D9AC957405A00DC7C1D0CC4A6173E3214C C3D0977067AE4C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM710_002]...Done
Executing Loader...OK
Detecting Stroage Type...OK
Hardware : SDM710, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : 00WW_6_21F, 00WW_6_21F [Mon Jan 17 15:38:32 CST 2022]
Android Ver. : 11
Patch Level : 2021-12-01
Writing [PNX-0-6210-xbl.elf] -> [xbl_a] ...Done
Writing [PNX-0-6210-xbl_config.elf] -> [xbl_config_a] ...Done
Writing [PNX-0-6210-tz.mbn] -> [tz_a] ...Done
Writing [PNX-0-6210-aop.mbn] -> [aop_a] ...Done
Writing [PNX-0-6210-hyp.mbn] -> [hyp_a] ...Done
Writing [PNX-0-6210-keymaster64.mbn] -> [keymaster_a] ...Done
Writing [PNX-0-6210-cmnlib.mbn] -> [cmnlib_a] ...Done
Writing [PNX-0-6210-cmnlib64.mbn] -> [cmnlib64_a] ...Done
Writing [PNX-0-6210-NON-HLOS.bin] -> [modem_a] ...Done
Writing [PNX-0-6210-dspso.bin] -> [dsp_a] ...Done
Writing [PNX-0-6210-abl.elf] -> [abl_a] ...Done
Writing [PNX-0-6210-abl.elf] -> [abl_b] ...Done
Writing [PNX-0-6210-logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [PNX-0-6210-BTFM.bin] -> [bluetooth_a] ...Done
Writing [PNX-0-6210-00WW-dtbo.img] -> [dtbo_a] ...Done
Writing [PNX-0-6210-persist.img] -> [persist] ...Done
Writing [PNX-0-6210-devcfg.mbn] -> [devcfg_a] ...Done
Writing [PNX-0-6210-qupv3fw.elf] -> [qupfw_a] ...Done
Writing [PNX-0-6210-storsec.mbn] -> [storsec_a] ...Done
Writing [PNX-0-6210-00WW-vbmeta.img] -> [vbmeta_a] ...Done
Writing [PNX-0-0010-0001-hidden.img.ext4] -> [hidden_a] ...Done
Writing [PNX-00WW-030-cda.img] -> [cda_a] ...Done
Writing [systeminfo.img] -> [systeminfo_a] ...Done
Writing [PNX-00WW-030-splash.img] -> [splash_a] ...Done
Writing [PNX-00WW-030-multi-splash.img] -> [zplash_a] ...Done
Writing [PNX-00WW-030-multi-splash.img] -> [zplash_b] ...Done
Writing [PNX-0-6210-NV-default.mbn] -> [nvdef_a] ...Done
Writing [PNX-00WW-001-sutinfo.img] -> [sutinfo] ...Done
Writing [PNX-0-6210-00WW-boot.img] -> [boot_a] ...Done
Writing [PNX-0-6210-00WW-system.img ] -> [system_a]...Done
Writing [PNX-0-6210-00WW-system_other.img ] -> [system_b]...Done
Writing [PNX-0-6210-00WW-vendor.img ] -> [vendor_a]...Done
Writing [PNX-0-6210-gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [PNX-0-6210-gpt_backup0.bin] -> [BackupGPT] ...Done
Reading Partition Table...OK
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.5