Redmi A3 Showing Only Qualcom HS-USB QD Loader 9008...[Solved]

[gsmkasargod]

Device Dead I was try one file complete flashing done but still same

Flashed Firmware
laurel_sprout_global_images_V11.0.23.0.QFQMIXM_202 01124.0000.00_10.0_f3be5e451c

Device info

Operation : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM19)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : SDM665, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Prod.Name : laurel_sprout
Software : qssi-user 10 QKQ1.190910.002 V11.0.23.0.QFQMIXM, V11.0.23.0.QFQMIXM [Mon Nov 23 22:51:36 CST 2020]
Android Ver. : 10
Patch Level : 2020-11-05
USERDATA : Encrypted
You can use DISABLE LOCKS to Disable Pin/Pattern/Password WITHOUT Data Loss.
Operation Finished.
QcFire Ver. 6.3

---

› See More: Redmi A3 Showing Only Qualcom HS-USB QD Loader 9008...[Solved]

[gsmkasargod]

Finally Flashed a firmware now the device enter to fastboot mode so please help me to solve

Flashed firmware
laurel_sprout_global_images_V12.0.3.0.RFQMIXM_11.0

[gsmkasargod]

Finally Solved
MI A3 Logo And Dead And Fastboot Mode Solution Here (gsmdevelopers.com)