Page 4 of 5 First ... 2345 Last
Results 31 to 40 of 46

Thread: Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL

  1. #31
    Junior Member
    Join Date
    Apr 2017
    Posts
    28
    Thanks Meter: 26
    LYF LS-4006 Hang on logo done by Flash.Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg




    › See More: Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL
    Attached Thumbnails Attached Thumbnails Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg  

  2. The Following User Says Thank You to SahilKhanMobtech For This Useful Post:


  3. #32
    Junior Member
    Join Date
    Apr 2017
    Posts
    28
    Thanks Meter: 26
    Asus X014D Flash done.Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg
    Attached Thumbnails Attached Thumbnails Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg  

  4. The Following 2 Users Say Thank You to SahilKhanMobtech For This Useful Post:


  5. #33
    Junior Member
    Join Date
    Apr 2017
    Posts
    28
    Thanks Meter: 26
    LYF Jio F41T (Black) Blue screen fix with flash.
    Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg
    Attached Thumbnails Attached Thumbnails Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg  

  6. #34
    Junior Member
    Join Date
    Apr 2017
    Posts
    28
    Thanks Meter: 26
    Lava Z40 FRP Reset done.
    Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg
    Attached Thumbnails Attached Thumbnails Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-1-jpg  

  7. #35
    Junior Member Titan_GSM's Avatar
    Join Date
    Apr 2019
    Location
    GSM_DEVELOPERS
    Posts
    5
    Thanks Meter: 2

    Smile Jio LYF-F61F Hang on logo done by Flash With UFIbox[SUCCESS REPORT]

    Jio LYF-F61F Hang on logo done by Flash With UFIbox

    Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-uaddh47-png
    Attached Thumbnails Attached Thumbnails Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-uaddh47-png  

  8. #36
    Member
    Join Date
    Jan 2019
    Posts
    46
    Thanks Meter: 2
    Hi brothers

    Please share you're valuable information

    I have one LG-815

    Hang on logo problems

    1. I am try to software update lg flashtool

    Then phone go to brick condition

    (Qualcomm 9008 driver mode)

    2. Try to repair qufil tool with xml file

    No response always show error

    3.try to flash emmc dump direct ufi box

    (Read dumb)

    And flash lg frimweare diract emmc

    (Still qualcomm mode) no bootup


    4. Try to flash emmc dump 810

    And flash lg frimweare (815)

    Result phone is dead (no pc contact)



    5. Today am remove and reballed cpu

    Result again detect qualcomm 9008 mode



    6. Open ufi Emmc tool
    Doing
    Factory erased emmc
    Erase
    Chek nand result for good
    Helth report result fine

    7.?????????????????...............
    ................................
    Pardon me my bad knowledge and english

    Sent from my Redmi Note 5 using Tapatalk

  9. #37
    Member
    Join Date
    Jan 2019
    Posts
    46
    Thanks Meter: 2
    MY Problems solved
    Cpu problem

    Sent from my Redmi Note 5 using Tapatalk

  10. #38
    Junior Member
    Join Date
    Apr 2017
    Posts
    28
    Thanks Meter: 26
    Lava A97 Ips flash done.Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-capture-jpg
    Attached Thumbnails Attached Thumbnails Successfully Unbricked/Debranding phones w/UFI BOX&DONGEL-capture-jpg  

  11. #39
    Junior Member p.suresh's Avatar
    Join Date
    Apr 2016
    Posts
    18
    Thanks Meter: 8
    REALME C1
    INFO
    Init bus...
    VCC: 3.3 V, VCCQ: 1.8 V
    Bus: 1 bit (SDR 4MHz)
    Access mode: sector mode
    Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
    Card/BGA: BGA (Discrete embedded) - High density MMC
    Manufacturer ID: 0x15 (Samsung)
    Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x79816826
    Manufacturing date: Jun 2018
    CID: 15010051 4536334D 42037981 6826659A
    CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
    EXT_CSD revision: 1.8 (MMC v5.1)
    Partition info:
    Boot1: 4096 KiB
    Boot2: 4096 KiB
    RPMB: 4096 KiB
    User area: 14.56 GiB(15,634,268,160 bytes)
    Cache size: 64 MiB
    Hardware reset function: 1
    Partition configuration: 0x38
    No boot acknowledge is sent (default)
    User area is enabled for boot
    Partitioning support: 0x07
    Device support partitioning feature
    Device can have enhanced technological features
    Device partitioning possible
    Boot configuration protection: 0x00
    Boot bus conditions: 0x00
    Boot area write protection: 0x00
    Power-on write protection: possible
    Permanent write protection: possible
    Lock status: not locked
    EXT_CSD backup saved to "\\%BACKUPS%\QE63MB_79816826.ext_csd"
    ANDROID System Info:
    platform: msm8953, cpu abi: arm64-v8a
    manufacturer: OPPO
    board: msm8953, name: RMX1811
    brand: OPPO, model: RMX1811(Realme C1)
    build id: OPM1.171019.026, version: 8.1.0 Oreo (RMX1811EX_11_A.24)
    build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190222.123456 release-keys
    crypto state: encrypted?

  12. #40
    Junior Member p.suresh's Avatar
    Join Date
    Apr 2016
    Posts
    18
    Thanks Meter: 8
    REALME C1
    Factory Reset
    Insertion test... Done.
    Init bus...
    VCC: 3.3 V, VCCQ: 1.8 V
    Bus: 1 bit (SDR 4MHz)
    Access mode: sector mode
    Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
    Card/BGA: BGA (Discrete embedded) - High density MMC
    Manufacturer ID: 0x15 (Samsung)
    Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x79816826
    Manufacturing date: Jun 2018
    CID: 15010051 4536334D 42037981 6826659A
    CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
    EXT_CSD revision: 1.8 (MMC v5.1)
    Partition info:
    Boot1: 4096 KiB
    Boot2: 4096 KiB
    RPMB: 4096 KiB
    User area: 14.56 GiB(15,634,268,160 bytes)
    Factory Reset...
    Creating filesystem... Done.
    Writing cache... Done.
    Creating filesystem... Done.
    Writing userdata... Done.
    Done

    - - - Updated - - -

    REALME C1 FRP DONE
    Insertion test... Done.
    Init bus...
    VCC: 3.3 V, VCCQ: 1.8 V
    Bus: 1 bit (SDR 4MHz)
    Access mode: sector mode
    Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
    Card/BGA: BGA (Discrete embedded) - High density MMC
    Manufacturer ID: 0x15 (Samsung)
    Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x79816826
    Manufacturing date: Jun 2018
    CID: 15010051 4536334D 42037981 6826659A
    CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
    EXT_CSD revision: 1.8 (MMC v5.1)
    Partition info:
    Boot1: 4096 KiB
    Boot2: 4096 KiB
    RPMB: 4096 KiB
    User area: 14.56 GiB(15,634,268,160 bytes)
    Clear FRP Lock... Done.
    GREAT UFI

Page 4 of 5 First ... 2345 Last

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •