Results 1 to 6 of 6

Thread: Sony Experia R1 Plus ( G2299 ) Frp Unlock Solution by UMT <==

  1. #1
    Junior Member
    Join Date
    Nov 2016
    Location
    Gujarat, India
    Posts
    5
    Thanks Meter: 36

    Post Sony Experia R1 Plus ( G2299 ) Frp Unlock Solution by UMT <==

    Sony Experia R1 Plus ( G2299 ) Frp Unlock Solution



    Sony Experia R1 Plus ( G2299 ) Frp Unlock Solution by UMT  &lt;==-41irhilorol-jpg
    Note : USE volume DOWN BUTTON AND CONNECET USB CABLE FOR FastBoot MODE
    ================================================== ===============


    USE UMT GSM AND GO TO MISCELLANEOUS option

    AFTER GO => QC FRP RESET & Click Execute button

    Port : Fastboot Interface
    Baud Rate : Not Applicable
    Device : Generic
    Operation : Qualcomm FRP Reset
    Searching for Device in FastBoot Mode... OK
    Reading Information... OK
    FastBoot Ver. : 0.5
    Product : QC_REFERENCE_PHONE
    Warranty : Yes
    Bootloader : Unlocked
    Removing FRP Lock... Done
    Operation Finished.
    Elapsed Time: 00:02
    [Module Ver. 4.8]
    Log Saved to Logs\180516_121612.log

    =============================================


    Best Regard , Athaniya Javed

    IF YOU LIKE THEN PRESS THNX BUTTON







    › See More: Sony Experia R1 Plus ( G2299 ) Frp Unlock Solution by UMT <==
    Attached Thumbnails Attached Thumbnails Sony Experia R1 Plus ( G2299 ) Frp Unlock Solution by UMT  &lt;==-41irhilorol-jpg  


  2. #2
    Senior Member sandeepdwivedi's Avatar
    Join Date
    Jun 2017
    Location
    SATNA M.P
    Posts
    659
    Thanks Meter: 441
    thanks Bro for nice info.

  3. #3
    Junior Member
    Join Date
    Apr 2017
    Posts
    1
    Thanks Meter: 0
    Quote Originally Posted by sandeepdwivedi View Post
    thanks Bro for nice info.
    good job sir

  4. #4
    Member
    Join Date
    Jan 2018
    Location
    coonoor
    Posts
    32
    Thanked 1 Time in 1 Post
    Operation : Format FS
    Checking for existing devices...Found
    Port : Qualcomm HS-USB QDLoader 9008 (COM73)
    Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
    Opening Port...OK
    Init Handshake Sequence...OK
    Hardware ID : E1F00400 [8937] 00000000
    OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
    Initializing Protocol...OK
    Using Auto Loader Selection [3]
    Device may possibly not boot with this loader.
    Preparing Loader...Done
    Sending Loader [8937]...Done
    Executing Loader...OK
    Detecting Chip Type...OK
    Hardware : 8937, eMMC, 16 GB
    LU Count : 1 [0x01D1F000]
    WARNING! High Speed Driver is not installed.
    Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
    Reading Partition Table...OK
    Reading Device Information...OK
    Device : SONY G2199 [msm8937] [G2199]
    Software : S000008_171207, S000008_171207 [2017年 12œˆ 07— ˜ŸœŸ›› 15:44:31 CST]
    Android Ver. : 7.1.2
    Patch Level : 2017-12-01
    Formatting userdata [SafeMode]...Done
    Resetting FRP Lock......Done
    Operation Finished.
    QcFire Ver. 4.5

    done wih qc fire

  5. #5
    Junior Member
    Join Date
    Oct 2017
    Posts
    20
    Thanks Meter: 9
    Quote Originally Posted by ismail2cnr View Post
    Operation : Format FS
    Checking for existing devices...Found
    Port : Qualcomm HS-USB QDLoader 9008 (COM73)
    Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
    Opening Port...OK
    Init Handshake Sequence...OK
    Hardware ID : E1F00400 [8937] 00000000
    OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
    Initializing Protocol...OK
    Using Auto Loader Selection [3]
    Device may possibly not boot with this loader.
    Preparing Loader...Done
    Sending Loader [8937]...Done
    Executing Loader...OK
    Detecting Chip Type...OK
    Hardware : 8937, eMMC, 16 GB
    LU Count : 1 [0x01D1F000]
    WARNING! High Speed Driver is not installed.
    Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
    Reading Partition Table...OK
    Reading Device Information...OK
    Device : SONY G2199 [msm8937] [G2199]
    Software : S000008_171207, S000008_171207 [2017年 12œˆ 07— ˜ŸœŸ›› 15:44:31 CST]
    Android Ver. : 7.1.2
    Patch Level : 2017-12-01
    Formatting userdata [SafeMode]...Done
    Resetting FRP Lock......Done
    Operation Finished.
    QcFire Ver. 4.5

    done wih qc fire
    How you put edl?

  6. #6
    Member .::Sunil Kumar::.'s Avatar
    Join Date
    Apr 2016
    Location
    Kadapa A.P. INDIA
    Posts
    85
    Thanks Meter: 67
    Sony Xperia R1 (G2199) FRP (Google Account) Lock Remove Done with this same process thanks...


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •