Results 1 to 3 of 3

Thread: Help alcatel 7041d hang on logo need firmware

  1. #1
    Senior Member
    Join Date
    Jun 2016
    Posts
    142
    Thanks Meter: 11

    Help alcatel 7041d hang on logo need firmware

    I have this phone hang on when i flash with other firmware it become dead need correct firmware please : 7041d-2aalke1


    › See More: Help alcatel 7041d hang on logo need firmware

  2. #2
    Moderator .::CH.Srinivas::.'s Avatar
    Join Date
    Mar 2016
    Location
    Hyderabad INDIA
    Posts
    2,433
    Sonork
    not using
    Thanks Meter: 2,326
    chinnivardan
    Gsmdevelopers team

  3. #3
    Senior Member
    Join Date
    Jun 2016
    Posts
    142
    Thanks Meter: 11
    PHONE HANG ON LOGO FLASHED OK BY NCK BOX!

    Flash files count is :15
    Action : Firmware update.
    Selected Model: Alcatel: OT-7041D
    Exe version: NCKBox AndroidMTK 1.8.8.1
    Scenario: [1]Full Flash
    Reinsert phone battery.
    Battery must be charged.
    Phone must be off with battery inside.
    Please insert USB cable now...
    Detected : MediaTek PreLoader USB VCOM (Android) (COM142)
    Boot mode: Preloader
    Phone detected...Please wait
    Sending DA agent, please wait...
    Using Algo 1.
    ----------------------------------------------------
    BaseBand CPU :MT6582
    BaseBand CPU Secure Version : FF
    BaseBand CPU Bootloader Version : 01
    ----------------------------------------------------
    INT RAM: 128 KB SDRAM
    EXT RAM: 512 MB DRAM
    ----------------------------------------------------
    EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
    EMMC FW VERSION: 10:00:00:00:00:00:00:00
    EMMC CID: 11010030303447 : 000000000000000000
    EMMC UA SIZE: 0xec000000
    BOOT STYLE: EMMC BOOT
    FULL LENGTH: 0xec480000 [3.692 GB]
    Preloader SEC version: 2
    Status: USB_HIGH_SPEED
    Detecting high speed port, wait......
    If driver not installed, install high speed port driver.
    If not need high speed port, disable it.
    After repeat opperation.
    Detecting high speed port, wait......
    Detected : MediaTek DA USB VCOM Port (COM35)
    Flash EMMC Algo Start.
    Preloader saved in firmware directory.
    Starting flash.
    FORMAT EMMC FLASH : BEGIN: 0x1900000 - LEN: 0xa00000
    FORMAT EMMC FLASH : BEGIN: 0x2300000 - LEN: 0xa00000
    FORMAT EMMC FLASH : BEGIN: 0x51f80000 - LEN: 0x13900000
    FORMAT EMMC FLASH : BEGIN: 0x65880000 - LEN: 0x82c00000
    Download firmware to flash now...
    Wait untill phone will start charging.
    All done.

    FLASHFILE HERE:
    http://www.mediafire.com/file/uifhkj...al_firmware.7z

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •