Results 1 to 1 of 1

Thread: samsung j7 pro sm-j730f dump file needed

  1. #1
    Junior Member
    Join Date
    Dec 2016
    Posts
    11
    Thanks Meter: 5

    samsung j7 pro sm-j730f dump file needed

    Samsung sm-j730f dump file need



    Help me please samsung j7 pro sm-j730f dead boot repair problem

    eMMC_tool Suite ver. 1.5.2.0 (release date: 06.08.2018)
    Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385)

    Looking for EasyJTAG box...
    EasyJTAG API ver. 2100
    EasyJTAG Box Serial = 1900B005700F983B
    Card Serial = AA5B6BDE
    EasyJTAG Box Firmware = 1.63



    Changelog:

    06.08.2018 (ver 1.5.2.0)
    Fix: Bugs that have been found through your crash report
    Fix: Writing ROM2 for Samsung (Write by vendor)
    Fix: Freezing the program on a RandomVerify
    Add: Folder for saving to Explorer (in settings)
    Add: Extract from store.vol from emmc (explorer)
    Add: Automatic repair of damaged store.vol when extracting (Explorer)
    Add: Adding MountPoints for partitions (efs, userdata) when formatting
    Add: Checking for an empty EFS before backup (Read by Vendor Samsung)


    Setting frequence to 14 Mhz
    CMD Pullup Level: 1278 mV
    CMD Active Level: 2423 mV
    Can't init device. Reason: -15 Unknown error

    Setting frequence to 21 Mhz
    CMD Pullup Level: 433 mV
    CMD Active Level: 2217 mV
    EMMC Device Information :
    EMMC CID: 150100434B544D34520012DEF0A284F4
    EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
    EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: 12DEF0A2 , rev. 0x00
    EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 8/2017
    EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
    EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
    EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
    EMMC Permanent Write Protection: No
    EMMC Temporary Write Protection: No
    Extended CSD Information :
    Extended CSD rev: 1.8 (MMC 5.1)
    Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
    Boot Bus Config: 0x01 , width 4bit
    H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
    Supported partition features [PARTITIONING_SUPPORT]: 0x07
    Device supports partitioning features
    Device can have enhanced technological features in partitions and user data area
    Device can have extended partitions attribute
    Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
    Backup saved: CKTM4R_12DEF0A2_20181213_125657.extcsd
    EMMC Init completed.

    Operation: write by vendor samsung
    Creating GPT-partitionnig
    Error reading at address: 000000000000 , error: -15, -15 Unknown error ...



    › See More: samsung j7 pro sm-j730f dump file needed

  2. The Following User Says Thank You to IQBALHASAN62 For This Useful Post:


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •