Results 1 to 10 of 10

Thread: 10.or G Dead Boot Repair/Unbrick/ Flashing Firmware[8.1.0] Guide By GD_Mekail92

  1. #1
    Supreme Moderator GD_Mekail92's Avatar
    Join Date
    Feb 2017
    Location
    Gsm Developers
    Posts
    5,249
    Sonork
    not yet
    Thanks Meter: 12,726

    10.or G Dead Boot Repair/Unbrick/ Flashing Firmware[8.1.0] Guide By GD_Mekail92

    10.or G Dead Boot Repair/Unbrick/Flashing Firmware [Oreo Version 8.1.0]Guide By GD_Mekail92

    10.Or G Edl Test Point


    Flash Tool
    HQXA_Transsion_CustomerDL_EMMC_V1.19.5



    Firmware
    10or_G_V1_0_72 [Oreo Version] Shared By GD_Mekail92

    Guide
    HQXA_Transsion_CustomerDL_EMMC_V1.19.5 Shared By GD_Mekail92

    • Click /Run -ets.startrun
    • Window Will Open On Key Tab Type = administrator
    • Press Okay

    See Image For Reference




    • Now Click On Usb Tab On upper Left Side
    • Connect Device In Edl Mode [Switch Off the Device Hold Vol up + Vol Down And Plug Usb]
    • If Device Is Dead Or Making "Qualcomm HS-USB Diagnostics 900E " Then Use Test Point, Picture Posted Above
    • After Connecting Check Usb Number And Remmember that
    • Now Click On SET And Select DL MOde=Emergency Mode NV Data Emergency Download Ver /Retain NV
    • Click On Change Path And Select The Firmware [Were You Have Been Saved]
    • Select The USB [Which You Saw On Previous Step]
    • Press Ok
    • See Image For Reference




    • After Click Okay Software verification Will Start-Wait Till It Finish
    • See Image For Reference

    • Check Tool Will SHow Device Connected And Ready
    • Click On Start ALL And Wait Till Flashing Get Completed
    • See Image For Reference




    Password Download From Attachment




    › See More: 10.or G Dead Boot Repair/Unbrick/ Flashing Firmware[8.1.0] Guide By GD_Mekail92
    Attached Files Attached Files


  2. #2
    Junior Member
    Join Date
    May 2019
    Posts
    5
    Thanks Meter: 0
    rar is broken
    there is a checksum error in system3.img

    can you please reupload the file?

  3. #3
    Junior Member
    Join Date
    May 2019
    Posts
    5
    Thanks Meter: 0

    o supreme one spare a moment and save a humble servant from a tough fate

    all hail to the super mod
    o exalted one punish me for being a fool to disturb your peace
    thou knowest all, thou see'est all, but thou reply to some

    thou giveth more than one could wish for
    but in pursuit of sacred knowledge of gsm development
    i came accross the exact file i was looking for
    here in your garden of eden
    where more seekers of the sacred knowledge
    have built a true community of love sharing care and hope
    this humble servant could never even dare to insult your grace by thanking you
    when i tried to use the file even after donwloading multiple times
    the files dont extract correctly
    there is a crc error in system3.img

    o supreme one thou giveth in abundance
    one could never ask more
    this humble servant of yours would never ask fore more

    thou knoweth all too well what predicament
    one finds oneself in after he performs the silly sins of android development
    thou knoweth all to well that the file in question could indeed end my current predicament

    this humble servant has nothing to offer knowing that the supreme one is all and in all
    trying to offer you something would be to like taking
    a bucket of water out of bay of bengal and pouring it in the arabian sea



    o supreme controller of fate
    give me a sign
    tell me should i wait for a reupload
    or start saving to get a new device?

    which path will you drive this humble srvant of yours
    please give me a sign


    10.or G Dead Boot Repair/Unbrick/ Flashing Firmware[8.1.0] Guide By GD_Mekail92

  4. #4
    Supreme Moderator GD_Mekail92's Avatar
    Join Date
    Feb 2017
    Location
    Gsm Developers
    Posts
    5,249
    Sonork
    not yet
    Thanks Meter: 12,726
    Quote Originally Posted by blaaze274 View Post
    rar is broken
    there is a checksum error in system3.img

    can you please reupload the file?
    ok will upload morning

  5. The Following 2 Users Say Thank You to GD_Mekail92 For This Useful Post:


  6. #5
    Junior Member
    Join Date
    May 2019
    Posts
    5
    Thanks Meter: 0
    thanx a million

  7. #6
    Supreme Moderator GD_Mekail92's Avatar
    Join Date
    Feb 2017
    Location
    Gsm Developers
    Posts
    5,249
    Sonork
    not yet
    Thanks Meter: 12,726
    As per request
    Google Drive - Virus scan warning

    password=
    Mekail92
    M Capital other all small...

    if you are still facing issue.try to download Vitout any download Manager.

  8. The Following 3 Users Say Thank You to GD_Mekail92 For This Useful Post:


  9. #7
    Junior Member
    Join Date
    May 2019
    Posts
    5
    Thanks Meter: 0
    i will test it today and let you know

  10. #8
    Junior Member
    Join Date
    May 2019
    Posts
    5
    Thanks Meter: 0
    download, extraction and flashing went fine
    but the phone stuck for 15 mins in 10.or powered by android boot screen

    what could be wrong?
    i am using the 3gb 32gb variant of the 10.or G

  11. #9
    Supreme Moderator Mohd Saqib's Avatar
    Join Date
    Jul 2016
    Location
    INDIA/ DELHI
    Posts
    5,100
    Sonork
    ڈویلپرز
    Thanks Meter: 8,750
    Quote Originally Posted by blaaze274 View Post
    download, extraction and flashing went fine
    but the phone stuck for 15 mins in 10.or powered by android boot screen

    what could be wrong?
    i am using the 3gb 32gb variant of the 10.or G
    Before Flash Device Issue ??

    And Post Own Thread With Mention`s All Details
    BEST REGARDS
    Mohd Saqib


    . I DO NOT provide support via PM
    . Before Post Read Forum Rules
    . Respect All Members


  12. The Following User Says Thank You to Mohd Saqib For This Useful Post:


  13. #10
    Junior Member
    Join Date
    Jun 2019
    Posts
    1
    Thanks Meter: 0

    password not working for new uploaded firmware. please give password

    password not working for new uploaded firmware. please give password

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •